Custom Flight Controller using Arduino Uno

Hi,

I tried to build my own custom flight controller using Arduino Uno.
You can find all the source code at my github repo: https://github.com/anilkunchalaece/arduQuad

Following are the few test flights i tried :

I also developed my own GUI using Python (PyQt4 and PyQt Graph) for debugging and tuning

This is the one of the many problems i had to tackle to get above flight performance

The problem in the above video is using only Angle PID loop. to get minimum takeoff we have to use cascaded PID loops i.e Angular Rate followed by Angle PID loop.

The code i used to achieve take off is https://github.com/anilkunchalaece/arduQuad/blob/master/ArduinoCode/ksrmQuadLevelModePlusConfig/ksrmQuadLevelModePlusConfig.ino

Source code for python GUI
https://github.com/anilkunchalaece/arduQuad/blob/master/PythonCode/GUI/graphGUI_v2.py

Following are the few references i used

https://github.com/benripley/Arduino-Quadcopter

https://github.com/lobodol/drone

https://github.com/metbosch/Arduino-Quadcopter

http://www.brokking.net/ymfc-al_main.html

https://blog.owenson.me/build-your-own-quadcopter-flight-controller/

This is me flying APM2.7 with the same build.

I suck at flying, still lot to learn.
This is how it ended up, crashing on a tree.

and luckily nothing broken :)


Btw i used complementary filter to get the angles from MPU 6050. Drop a comment if are doing the same, i am very happy to join with you to continue this.